|
SW | Bit | Description | Value | Meanings |
SW1 N:A3FE2h H:E3FE2h |
7,6 | Length of stop bits | 11 | 2 bits |
10 | 1.5 bits | |||
01 | 1 bit | |||
5 | Parity Method | 1 | Even parity | |
0 | Odd parity | |||
4 | Parity checking | 1 | Enabled | |
0 | Disabled | |||
3,2 | Length of data bits | 11 | 8 bits | |
10 | 7 bits | |||
1 | Communication method (Terminal mode) |
1 | Half duplex | |
0 | Full duplex | |||
0 | X-parameters (XON/XOFF flow control) | 1 | Enabled | |
0 | Disabled | |||
SW2 N:A3FE6h H:E3FE6h |
7 | S parameter (7-bit ANK bank switched by SI/SO) |
1 | Enabled |
0 | Disabled | |||
6 | Line-feed code when sending data | 1 | CR+LF | |
0 | CR | |||
5 | Line-feed Operation when receiving | 1 | CR+LF when received CR+LF CR when received CR |
|
0 | CR+LF when received CR | |||
4 | Kanji shift code | 1 | KI:1A70h KO:1A71h | |
0 | KI:1B4Bh KO:1B48h | |||
3,2,1,0 | Transfering speed | 1001 | 19200bps | |
1000 | 9600bps | |||
0111 | 4800bps | |||
0110 | 2400bps | |||
0101 | 1200bps | |||
0100 | 600bps | |||
0011 | 300bps | |||
0010 | 150bps | |||
0001 | 75bps | |||
SW3 N:A3FEAh H:E3FEAh |
7 | Operation when received DEL code (Editor mode) |
1 | NUL |
0 | DEL | |||
7 | Operation when received DEL code (Terminal mode) |
1 | NUL | |
0 | BS | |||
6 | Text color | 1 | Green | |
0 | White | |||
5 | Clock speed of V30 Co-processor | 1 | 8 MHz | |
0 | 5 or 10 MHz | |||
4 | Co-processor for V30 | 1 | Use | |
0 | Not use | |||
3 | Co-processor for 8086,80286,386 | 1 | Use | |
0 | Not use | |||
2,1,0 | Size of the conventional memory | 101 | 768KB(only in Hi-reso mode) | |
100 | 640KB | |||
011 | 512KB | |||
010 | 384KB | |||
001 | 256KB | |||
000 | 128KB | |||
SW4 N:A3FEEh H:E3FEEh |
7 | Expansion ROM(CE000h - CFFFFh) | 1 | Enabled |
0 | Disabled | |||
6 | Expansion ROM(CA000h - CBFFFh) | 1 | Enabled | |
0 | Disabled | |||
5 | Expansion ROM(D4000h - D5FFFh) (GP-IB Board BIOS) |
1 | Enabled | |
0 | Disabled | |||
4 | Expansion ROM(D0000h - D3FFFh) (RS-232C Expansion Board BIOS) |
1 | Enabled | |
0 | Disabled | |||
3 | Expansion ROM(CC000h - CFFFFh) (Sound Board BIOS) |
1 | Enabled | |
0 | Disabled | |||
2 | Expansion ROM(C8000h - C9FFFh) | 1 | Enabled | |
0 | Disabled | |||
1 | (Reserved) | 0 | Always "0" | |
0 | (Reserved) | 0 | Always "0" | |
SW5 N:A3FF2h H:E3FF2h |
7,6,5,4 | Select a boot device | 1100 | SCSI HDD #1 |
1011 | HDD #2 | |||
1010 | HDD #1 | |||
1000 | ROM BASIC | |||
0110 | MO | |||
0100 | 1MB FDD | |||
0010 | 640KB FDD | |||
0000 | Default | |||
Others | ROM BASIC (Built-in BASIC) | |||
3 | Color of the Screen Hardware Copy | 1 | Color | |
0 | Monochrome | |||
2 | Use HDD User ID | 1 | Enabled | |
0 | Disabled | |||
1 | Assign device names to HDDs first | 1 | Enabled | |
0 | Disabled | |||
0 | PC-PR201 series printer | 1 | Enabled | |
0 | Disabled | |||
SW6 N:A3FF6h |
7 | (Reserved) | 0 | Always "0" |
6 | (Reserved) | 0 | Always "0" | |
5 | Use a modem - NCU control | 1 | Enabled | |
0 | Disabled | |||
4 | Use the extended screen copy | 1 | Enabled | |
0 | Disabled | |||
3 | Use the monitor mode | 1 | Enabled | |
0 | Disabled | |||
2 | (Reserved) | 0 | Always "0" | |
1 | (Reserved) | 0 | Always "0" | |
0 | (Reserved) | 0 | Always "0" |
Default : 48-05-04-00-01-00